少妇人妻精品一区二区三区-成年人看的性生活视频-欧美三级a做爰全过裸体-国产夫妻性生活免费看

FT43H lever floating ball steam trap valve

FT43H lever floating ball steam trap valve
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

FT43H lever floating ball steam trap valve


Performance advantages


1. Continuous discharge of saturated condensate heating equipment will not have water accumulation, thus achieving the highest thermal efficiency.


2. When the steam pressure changes, the opening of the seat hole of the valve can be adjusted automatically by the floating ball driving lever. The operation is continuous and the performance is stable.


3, exhaust air performance is good. The automatic air exhausting device can discharge non condensing hot and cold gas without air lock, and work smoothly and without noise.


4, excellent sealing performance. The seal adopts spherical seal, and there is no centralized wear life.


purpose


Used in steam heating equipment and condensate recovery system and the working conditions that need to remove condensate quickly, condensate can be automatically, rapidly and continuously removed, effectively prevent steam leakage, and obtain the best heating effect.


Working principle


When the valve is just started, the automatic air exhausting device quickly eliminates the non condensable gas in the system. When steam and hot condensate enter, the temperature in the valve chamber increases, the exhaust air device automatically closes, the float rises and falls according to the change of condensate water level, drives the lever to adjust the opening of the valve seat, and continuously discharges condensate. When the condensate stops entering, the float drops by weight, driving the lever to drive the spool to close the drain valve seat hole.


Use and maintenance


1, we should confirm that the maximum material, pressure and temperature of the valve body can meet the requirements of the working condition.


2, before installation, the pipeline must be cleaned and debris removed.


3, installation position should be as close as possible to heating equipment.


4, should be installed at the lowest point of the pipeline, and the direction of flow is consistent with the direction marked on the valve body.


5, each heating equipment should install traps separately, so as not to affect each other.


6. In order to ensure the safe operation of the system, slowly open the trap money valve to gradually warm up to the normal state.


7, regular maintenance, to ensure the normal work of steam traps.


Selection is the main basis.


Condensate load (drain volume) kg/h (2-3 times the multiplying rate)


Maximum working pressure MPa


Working pressure differential MPa


Valve body material and nominal pressure


Connection mode and size

Main dimensions


型號(hào)
公稱通徑
連接方式
L
H
H1
L1
A×C
B
16
FT43H 25
40
杠桿浮球式
15
法蘭
150
250
190
100
90
20
20
150
250
190
100
90
23
25
160
250
190
100
90
23
32
230
335
270
160
120
158
40
230
335
270
160
120
158
50
230
335
280
160
120
158


The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.FT43H lever floating ball steam trap valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!
搞基视频在线播放观看| 国产老熟女午夜精品视频| 日韩精品亚洲一级在线观看| 亚洲av天堂在线播放| 91大神黑丝美女洗澡| 手机人妻看片日韩少妇| 一级黄片电影中文字幕 | 91精品国产91久久综合福利| 喉咙长白白的颗粒怎么办| 久久国产综合精品电影| 亚洲国产熟女一区二区三区| 在线看黄视频网站永久免费| av免费在线网页入口| 日本黄色中文字幕网站| 黄色成人精品一区二区三区| 国产高清在线不卡一区| 国产成人av一区二区三| 黄色成人av免费看| 夸克韩漫免费网站无遮挡| 人人人妻在线亚洲视频| 丁香婷婷在线成人播放视频| 高质量的性生活在线观看| 99精品日本观看久久| 日韩高清不卡一区二区| 日本高清人妻一区二区| 中文字字幕乱码视频色| 一区二区三区毛片av网站| 亚洲成熟中老妇女视频| 日本国产一区二区精品| 国产自偷一区二区三区| 亚洲国产精品综合久久久| 成人国产精品一区二区不卡| 国产福利午夜在线播放| 91精品国产乱码久久| 黑丝美女大战白丝美女| 国产精品日韩欧美亚洲| 国产精品一区二区三区视频观看| 亚洲天堂av在线观看| 精品久久av一区二区| 最新国产主播一区二区| 亚洲高清国产一区二区|